Pneumatic Wafer Type Triple/Three Eccentric Butterfly Valve
Summary:
PneumaticTriple/Three Eccentric Butterfly Valve is composed of pneumatic actuator and three-eccentric butterfly valve. According to the connection mode is different, generally it can be divided into flange or clamp type. Material is divided into cast iron, cast pot, stainless steel and so on. The valve body part adopts the three-eccentric structure, and the disc and the seal mechanism design is unique, which has the fine cutting performance and the durable performance. Simultaneously this kind of valve has cuts off, the adjustment dual function, and belongs to the butterfly valve with long life andthe energy saving.
| Pneumatic Flange Type Triple/Three Eccentric Butterfly Valve |
| Valve |
PneumaticTriple/Three Eccentric Butterfly Valve |
| Model |
ZTD643H,ZTD673H |
| Size |
DN50-1200mm |
| Nominal Perssure |
PN10,PN16,PN25,PN40 |
| Body Material |
Carbon steel (WCB)Stainless steel(CF8,CF83,CF3,CF3M) |
| Working Temperature |
-40~+450ºC |
| Accessory |
Solenoid valve, positioner, limit switch,
manual mechanism |
| Application range |
Water, steam, air, oil and food, etc. |
| Features |
It has small wear, long life, energy-saving, and wide application range. It can be used for high temperature and high pressure. |
| Technical Parameters of Butterfly Valve |
| Nominal Diameter |
DN50-1200mm |
| Rated Air Leak |
PN10,PN16,PN25,PN40MPa |
| Connection |
Wafer Type |
| Sealing Type |
Metal-to-metal |
| Air Pressure |
0.4-0.7MPa |
| Range of Action |
0~90º |
| Leakage Amount |
According to GBT4213-92, is 10-4 of rated Kv. |
| Body Material |
Carbon steel (WCB)Stainless steel(CF8,CF83,CF3,CF3M) |
| Disc Material |
Carbon steel (WCB)Stainless steel(CF8,CF83,CF3,CF3M) |
| Limit of Intrinsic Error |
Less than ±2%of the whole process with positioner. |
| Working Temperature |
Carbon steel:+29~+400ºC;Stainless steel:+40~+450ºC |
| Mode of Action |
Single action(spring return),Double Action(normal open&normal close) |
| Control Type |
Adjust type; On-off Type |
The appearance and structure of butterfly valve:
Structure principle:
A typical three-eccentric pneumatic butterfly valve, in addition to the stem and the valve plate has two eccentric, the valve plate and seat sealing surface is inclined round table shape (this is the so-called three-eccentric third eccentric). When the valve is closed, the valve plate is pushed forward due to eccentricity, and the valve plate and seat do not produce friction in the closing process. The valve plate is directly pressed on the seat, thus ensuring the service life of the valve. In addition, as a result of this kind of valve sealing ring has a certain elasticity, and the elastic ring in the convex and elastic ring between the gap between a few stars can make the elastic ring a little displacement. When the valve is closed, the sealing ring can automatically move to the most uniform position under the action of closing.
Advantages:
1. Adopt the three-dimensional eccentric sealing structure, which makes wear of the valve degree and the butterfly plate is small, and sealing surface wear resistance to extend the service life.
2. According to the pneumatic wafer type three-eccentric butterfly valve and pneumatic flange type three-eccentric butterfly valve, they can be used in different process pipelines.
3. Large diameter butterfly valve butterfly plate can be used in the structure with high strength, large flow area, small flow resistance characteristics.
4. Bidirectional three-eccentric multi-layer hard sealing structure is adopted, which has the function of bidirectional sealing. It is not limited by the flow direction of media or affected by the spatial position during installation, and can be installed in any direction.
5. With the dual advantages of metal hard seal and elastic seal, it has excellent sealing performance, corrosion resistance and long service life, no matter at low temperature or high temperature.
Company Introduction:
Zhitai Valve Co., Ltd is a member of Valve Association of Longwan District, is located in Longwan Central Industrial Zone, Wenzhou City. It'a professional technology company integrated with development, manufacturing, sales, and after-sales services of valve actuators and and self-controlled valves. Presently, our main products include: pneumatic actuators, pneumatic valves and pneumatic control valves; electric actuators, electeic valves and eletric control valves; automatic control products. Our products are widely applied in natural gas, electricity, petroleum, chemical, metallurgical, construction, pharmacy, paper, printing and dying. Zhitai series actuators and valves are the best choice for automatic fluid control engineering and equipment manufacturing. We sincerely welcome customers from home and abrode to visit us for supervision, communication and cooperation. It's a great honor for us to cooperate with you.
Audited Supplier 
){kind=link}